Milk Powder

IUPAC Name

:   (2R,3R,4S,5R,6S)-2-()-6-{[(2R,3S,4R,5R,6R)-4,5,6-Trihydroxy-2-(hydroxymethyl)oxan-3-yl]oxy}oxane-3,4,5-triol

Cas Number

:   93605-22-6

HS Code

:   0402.29.90

Formula

:  

C12H22O11

Basic Info

Appearance Name

:   White Powder

Common Names

:   Powdered Milk

Packaging

: 25 kg in fiber drum, 25 kg in plastic bag, 1 - 25 kg in aluminum foil bag

Interested in this product?

For more detailed information including pricing, customization, and shipping:

Technical Document

Brief Overview

Milk powder is obtained by dehydration of milk. Dehydration of milk is done to increase milk's shelf life without using a refrigerator. Several types of milk powders are based on requirements, like whole, skimmed, and buttermilk. Milk powders are widely used around the world for their various applications. From infant formulas to desserts, milk powders have found their way to being one of the most prominent market players in the world. Apart from the food industry, milk powder is widely used in the field of biotechnology and also for research purposes.

Manufacturing Process

The first step is separation and standardization. The raw milk from the dairy factory is pasteurized and separated into skim milk and cream using the centrifugal cream separator. It must be ensured that there is 26 - 30 % fat in the milk powder. This step is followed by preheating, where milk is heated to 75 – 120 °C. The milk is held at this temperature for a few minutes. The milk is preheated to control the denaturation of whey proteins in the milk, destroys bacteria, inactivates enzymes, generates natural antioxidants, and imparts heat stability. The next step is evaporation. In the evaporator, the preheated milk is concentrated in stages” from around 9.0% total solids content for skim milk and 13% for whole milk, up to 45 - 52 % total solids. This is achieved by boiling milk below 72 °C and removing water as vapor. This vapor can be recycled again. The next step is spray drying, involving atomizing milk concentrates from the evaporator into fine droplets. This is performed in a large drying chamber with facilities for hot air flow. The milk droplets are then cooled by evaporation, leaving a fine powder with around 6 % moisture content with a mean particle size typically of < 0.1 mm diameter. Final or “secondary” drying takes place in a fluid bed or in a series of such beds, in which hot air is blown through a layer of fluidized powder removing water to the point of moisture content between 2 - 4 %. The final stage is the packaging. Milk powders are enormously more stable than fresh milk, but protection from moisture, oxygen, light, and heat is needed to preserve their quality and shelf life. Milk powder is packed into either plastic-lined multi-wall bags or bulk bins. 

Food Industry

Milk powders have longer shelf life than regular milk and thus can be a perfect substitute for milk. Milk powders contain all 21 amino acids and therefore have high nutritional value. And because of this, It is very good for remote areas or the parts of the world where there is no or very little milk.

Cosmetic Industry

Milk powders are widely used in cosmetics and the skincare industry. It is used as a whitening agent. 

Research Purposes 

Milk powders are nowadays widely used for research purposes. For example, Fat-free powdered milk is used as a saturating agent to block nonspecific binding sites on supports like blotting membranes.

Related Products Chemtradeasia
-->